Informatics Educational Institutions & Programs
|Appearance||silvery white metallic|
|Standard atomic weight Ar, std(Ru)||101.07(2)|
|Ruthenium in the periodic table|
|Atomic number (Z)||44|
|Electron configuration||[Kr] 4d7 5s1|
|Electrons per shell||2, 8, 18, 15, 1|
|Phase at STP||solid|
|Melting point||2607 K (2334 °C, 4233 °F)|
|Boiling point||4423 K (4150 °C, 7502 °F)|
|Density (near r.t.)||12.45 g/cm3|
|when liquid (at m.p.)||10.65 g/cm3|
|Heat of fusion||38.59 kJ/mol|
|Heat of vaporization||619 kJ/mol|
|Molar heat capacity||24.06 J/(mol·K)|
|Oxidation states||−4, −2, 0, +1, +2, +3, +4, +5, +6, +7, +8 (a mildly acidic oxide)|
|Electronegativity||Pauling scale: 2.2|
|Atomic radius||empirical: 134 pm|
|Covalent radius||146±7 pm|
|Spectral lines of ruthenium|
|Crystal structure||hexagonal close-packed (hcp)|
|Speed of sound thin rod||5970 m/s (at 20 °C)|
|Thermal expansion||6.4 µm/(m⋅K) (at 25 °C)|
|Thermal conductivity||117 W/(m⋅K)|
|Electrical resistivity||71 nΩ⋅m (at 0 °C)|
|Molar magnetic susceptibility||+39×10−6 cm3/mol (298 K)|
|Young's modulus||447 GPa|
|Shear modulus||173 GPa|
|Bulk modulus||220 GPa|
|Brinell hardness||2160 MPa|
|Naming||after Ruthenia, the 19th-century Latin name for Russia[a]|
|Discovery and first isolation||Karl Ernst Claus (1844)|
|Main isotopes of ruthenium|
Ruthenium is a chemical element with the symbol Ru and atomic number 44. It is a rare transition metal belonging to the platinum group of the periodic table. Like the other metals of the platinum group, ruthenium is inert to most other chemicals. Russian-born scientist of Baltic-German ancestry Karl Ernst Claus discovered the element in 1844 at Kazan State University and named ruthenium in honor of Russia.[a] Ruthenium is usually found as a minor component of platinum ores; the annual production has risen from about 19 tonnes in 2009 to some 35.5 tonnes in 2017. Most ruthenium produced is used in wear-resistant electrical contacts and thick-film resistors. A minor application for ruthenium is in platinum alloys and as a chemistry catalyst. A new application of ruthenium is as the capping layer for extreme ultraviolet photomasks. Ruthenium is generally found in ores with the other platinum group metals in the Ural Mountains and in North and South America. Small but commercially important quantities are also found in pentlandite extracted from Sudbury, Ontario and in pyroxenite deposits in South Africa.
|Z||Element||No. of electrons/shell|
|26||iron||2, 8, 14, 2|
|44||ruthenium||2, 8, 18, 15, 1|
|76||osmium||2, 8, 18, 32, 14, 2|
|108||hassium||2, 8, 18, 32, 32, 14, 2|
Whereas all other group 8 elements have two electrons in the outermost shell, in ruthenium, the outermost shell has only one electron (the final electron is in a lower shell). This anomaly is observed in the neighboring metals niobium (41), molybdenum (42), and rhodium (45).
Ruthenium has four crystal modifications and does not tarnish at ambient conditions; it oxidizes upon heating to 800 °C (1,070 K). Ruthenium dissolves in fused alkalis to give ruthenates (RuO2−
4), is not attacked by acids (even aqua regia) but is attacked by halogens at high temperatures. Indeed, ruthenium is most readily attacked by oxidizing agents. Small amounts of ruthenium can increase the hardness of platinum and palladium. The corrosion resistance of titanium is increased markedly by the addition of a small amount of ruthenium. The metal can be plated by electroplating and by thermal decomposition. A ruthenium-molybdenum alloy is known to be superconductive at temperatures below 10.6 K. Ruthenium is the only 4d transition metal that can assume the group oxidation state +8, and even then it is less stable there than the heavier congener osmium: this is the first group from the left of the table where the second and third-row transition metals display notable differences in chemical behavior. Like iron but unlike osmium, ruthenium can form aqueous cations in its lower oxidation states of +2 and +3.
Ruthenium is the first in a downward trend in the melting and boiling points and atomization enthalpy in the 4d transition metals after the maximum seen at molybdenum, because the 4d subshell is more than half full and the electrons are contributing less to metallic bonding. (Technetium, the previous element, has an exceptionally low value that is off the trend due to its half-filled [Kr]4d55s2 configuration, though it is not as far off the trend in the 4d series as manganese in the 3d transition series.) Unlike the lighter congener iron, ruthenium is paramagnetic at room temperature, as iron also is above its Curie point.
The reduction potentials in acidic aqueous solution for some common ruthenium ions are shown below:
|0.455 V||Ru2+ + 2e−||↔ Ru|
|0.249 V||Ru3+ + e−||↔ Ru2+|
|1.120 V||RuO2 + 4H+ + 2e−||↔ Ru2+ + 2H2O|
4 + 8H+ + 4e−
|↔ Ru2+ + 4H2O|
4 + 8H+ + 5e−
|↔ Ru2+ + 4H2O|
|1.387 V||RuO4 + 4H+ + 4e−||↔ RuO2 + 2H2O|
Naturally occurring ruthenium is composed of seven stable isotopes. Additionally, 34 radioactive isotopes have been discovered. Of these radioisotopes, the most stable are 106Ru with a half-life of 373.59 days, 103Ru with a half-life of 39.26 days and 97Ru with a half-life of 2.9 days.
Fifteen other radioisotopes have been characterized with atomic weights ranging from 89.93 u (90Ru) to 114.928 u (115Ru). Most of these have half-lives that are less than five minutes except 95Ru (half-life: 1.643 hours) and 105Ru (half-life: 4.44 hours).
The primary decay mode before the most abundant isotope, 102Ru, is electron capture and the primary mode after is beta emission. The primary decay product before 102Ru is technetium and the primary decay product after is rhodium.
106Ru is a product of fission of a nucleus of uranium or plutonium. High concentrations of detected atmospheric 106Ru were associated with an alleged undeclared nuclear accident in Russia in 2017.
As the 78th most abundant element in Earth's crust, ruthenium is relatively rare, found in about 100 parts per trillion. This element is generally found in ores with the other platinum group metals in the Ural Mountains and in North and South America. Small but commercially important quantities are also found in pentlandite extracted from Sudbury, Ontario, Canada, and in pyroxenite deposits in South Africa. The native form of ruthenium is a very rare mineral (Ir replaces part of Ru in its structure).
Roughly 30 tonnes of ruthenium are mined each year with world reserves estimated at 5,000 tonnes. The composition of the mined platinum group metal (PGM) mixtures varies widely, depending on the geochemical formation. For example, the PGMs mined in South Africa contain on average 11% ruthenium while the PGMs mined in the former USSR contain only 2% (1992). Ruthenium, osmium, and iridium are considered the minor platinum group metals.
Ruthenium, like the other platinum group metals, is obtained commercially as a by-product from nickel, and copper, and platinum metals ore processing. During electrorefining of copper and nickel, noble metals such as silver, gold, and the platinum group metals precipitate as anode mud, the feedstock for the extraction. The metals are converted to ionized solutes by any of several methods, depending on the composition of the feedstock. One representative method is fusion with sodium peroxide followed by dissolution in aqua regia, and solution in a mixture of chlorine with hydrochloric acid. Osmium, ruthenium, rhodium, and iridium are insoluble in aqua regia and readily precipitate, leaving the other metals in solution. Rhodium is separated from the residue by treatment with molten sodium bisulfate. The insoluble residue, containing Ru, Os, and Ir is treated with sodium oxide, in which Ir is insoluble, producing dissolved Ru and Os salts. After oxidation to the volatile oxides, RuO
4 is separated from OsO
4 by precipitation of (NH4)3RuCl6 with ammonium chloride or by distillation or extraction with organic solvents of the volatile osmium tetroxide. Hydrogen is used to reduce ammonium ruthenium chloride yielding a powder. The product is reduced using hydrogen, yielding the metal as a powder or sponge metal that can be treated with powder metallurgy techniques or argon-arc welding.
The oxidation states of ruthenium range from 0 to +8, and −2. The properties of ruthenium and osmium compounds are often similar. The +2, +3, and +4 states are the most common. The most prevalent precursor is ruthenium trichloride, a red solid that is poorly defined chemically but versatile synthetically.
Oxides and chalcogenides
Ruthenium can be oxidized to ruthenium(IV) oxide (RuO2, oxidation state +4) which can in turn be oxidized by sodium metaperiodate to the volatile yellow tetrahedral ruthenium tetroxide, RuO4, an aggressive, strong oxidizing agent with structure and properties analogous to osmium tetroxide. RuO4 is mostly used as an intermediate in the purification of ruthenium from ores and radiowastes.
Dipotassium ruthenate (K2RuO4, +6), and potassium perruthenate (KRuO4, +7) are also known. Unlike osmium tetroxide, ruthenium tetroxide is less stable and is strong enough as an oxidising agent to oxidise dilute hydrochloric acid and organic solvents like ethanol at room temperature, and is easily reduced to ruthenate (RuO2−
4) in aqueous alkaline solutions; it decomposes to form the dioxide above 100 °C. Unlike iron but like osmium, ruthenium does not form oxides in its lower +2 and +3 oxidation states. Ruthenium forms dichalcogenides, which are diamagnetic semiconductors crystallizing in the pyrite structure. Ruthenium sulfide (RuS2) occurs naturally as the mineral laurite.
Like iron, ruthenium does not readily form oxoanions, and prefers to achieve high coordination numbers with hydroxide ions instead. Ruthenium tetroxide is reduced by cold dilute potassium hydroxide to form black potassium perruthenate, KRuO4, with ruthenium in the +7 oxidation state. Potassium perruthenate can also be produced by oxidising potassium ruthenate, K2RuO4, with chlorine gas. The perruthenate ion is unstable and is reduced by water to form the orange ruthenate. Potassium ruthenate may be synthesized by reacting ruthenium metal with molten potassium hydroxide and potassium nitrate.
Some mixed oxides are also known, such as MIIRuIVO3, Na3RuVO4, Na
7, and MII
Halides and oxyhalides
The highest known ruthenium halide is the hexafluoride, a dark brown solid that melts at 54 °C. It hydrolyzes violently upon contact with water and easily disproportionates to form a mixture of lower ruthenium fluorides, releasing fluorine gas. Ruthenium pentafluoride is a tetrameric dark green solid that is also readily hydrolyzed, melting at 86.5 °C. The yellow is probably also polymeric and can be formed by reducing the pentafluoride with iodine. Among the binary compounds of ruthenium, these high oxidation states are known only in the oxides and fluorides.
Ruthenium trichloride is a well-known compound, existing in a black α-form and a dark brown β-form: the trihydrate is red. Of the known trihalides, trifluoride is dark brown and decomposes above 650 °C, tetrabromide is dark-brown and decomposes above 400 °C, and triiodide is black. Of the dihalides, difluoride is not known, dichloride is brown, dibromide is black, and diiodide is blue. The only known oxyhalide is the pale green ruthenium(VI) oxyfluoride, RuOF4.
Coordination and organometallic complexes
Ruthenium forms a variety of coordination complexes. Examples are the many pentaammine derivatives [Ru(NH3)5L]n+ that often exist for both Ru(II) and Ru(III). Derivatives of bipyridine and terpyridine are numerous, best known being the luminescent tris(bipyridine)ruthenium(II) chloride.
Ruthenium forms a wide range compounds with carbon-ruthenium bonds. Grubbs' catalyst is used for alkene metathesis. Ruthenocene is analogous to ferrocene structurally, but exhibits distinctive redox properties. The colorless liquid ruthenium pentacarbonyl converts in the absence of CO pressure to the dark red solid triruthenium dodecacarbonyl. Ruthenium trichloride reacts with carbon monoxide to give many derivatives including RuHCl(CO)(PPh3)3 and Ru(CO)2(PPh3)3 (Roper's complex). Heating solutions of ruthenium trichloride in alcohols with triphenylphosphine gives tris(triphenylphosphine)ruthenium dichloride (RuCl2(PPh3)3), which converts to the hydride complex chlorohydridotris(triphenylphosphine)ruthenium(II) (RuHCl(PPh3)3).
Though naturally occurring platinum alloys containing all six platinum-group metals were used for a long time by pre-Columbian Americans and known as a material to European chemists from the mid-16th century, not until the mid-18th century was platinum identified as a pure element. That natural platinum contained palladium, rhodium, osmium and iridium was discovered in the first decade of the 19th century. Platinum in alluvial sands of Russian rivers gave access to raw material for use in plates and medals and for the minting of ruble coins, starting in 1828. Residues from platinum production for coinage were available in the Russian Empire, and therefore most of the research on them was done in Eastern Europe.
It is possible that the Polish chemist Jędrzej Śniadecki isolated element 44 (which he called "vestium" after the asteroid Vesta discovered shortly before) from South American platinum ores in 1807. He published an announcement of his discovery in 1808. His work was never confirmed, however, and he later withdrew his claim of discovery.
Jöns Berzelius and Gottfried Osann nearly discovered ruthenium in 1827. They examined residues that were left after dissolving crude platinum from the Ural Mountains in aqua regia. Berzelius did not find any unusual metals, but Osann thought he found three new metals, which he called pluranium, ruthenium, and polinium. This discrepancy led to a long-standing controversy between Berzelius and Osann about the composition of the residues. As Osann was not able to repeat his isolation of ruthenium, he eventually relinquished his claims. The name "ruthenium" was chosen by Osann because the analysed samples stemmed from the Ural Mountains in Russia. The name itself derives from the Latin word Ruthenia; this word was used at the time as the Latin name for Russia.[a]
In 1844, Karl Ernst Claus, a Russian scientist of Baltic German descent, showed that the compounds prepared by Gottfried Osann contained small amounts of ruthenium, which Claus had discovered the same year. Claus isolated ruthenium from the platinum residues of rouble production while he was working in Kazan University, Kazan, the same way its heavier congener osmium had been discovered four decades earlier. Claus showed that ruthenium oxide contained a new metal and obtained 6 grams of ruthenium from the part of crude platinum that is insoluble in aqua regia. Choosing the name for the new element, Claus stated: "I named the new body, in honour of my Motherland, ruthenium. I had every right to call it by this name because Mr. Osann relinquished his ruthenium and the word does not yet exist in chemistry."
Approximately 30.9 tonnes of ruthenium were consumed in 2016, 13.8 of them in electrical applications, 7.7 in catalysis, and 4.6 in electrochemistry.
Because it hardens platinum and palladium alloys, ruthenium is used in electrical contacts, where a thin film is sufficient to achieve the desired durability. With similar properties and lower cost than rhodium, electric contacts are a major use of ruthenium. The ruthenium plate is applied to the electrical contact and electrode base metal by electroplating or sputtering.
Ruthenium is seldom alloyed with metals outside the platinum group, where small quantities improve some properties. The added corrosion resistance in titanium alloys led to the development of a special alloy with 0.1% ruthenium. Ruthenium is also used in some advanced high-temperature single-crystal superalloys, with applications that include the turbines in jet engines. Several nickel based superalloy compositions are described, such as EPM-102 (with 3% Ru), TMS-162 (with 6% Ru), TMS-138, and TMS-174, the latter two containing 6% rhenium. Fountain pen nibs are frequently tipped with ruthenium alloy. From 1944 onward, the Parker 51 fountain pen was fitted with the "RU" nib, a 14K gold nib tipped with 96.2% ruthenium and 3.8% iridium.
Ruthenium is a component of mixed-metal oxide (MMO) anodes used for cathodic protection of underground and submerged structures, and for electrolytic cells for such processes as generating chlorine from salt water. The fluorescence of some ruthenium complexes is quenched by oxygen, finding use in optode sensors for oxygen. Ruthenium red, [(NH3)5Ru-O-Ru(NH3)4-O-Ru(NH3)5]6+, is a biological stain used to stain polyanionic molecules such as pectin and nucleic acids for light microscopy and electron microscopy. The beta-decaying isotope 106 of ruthenium is used in radiotherapy of eye tumors, mainly malignant melanomas of the uvea. Ruthenium-centered complexes are being researched for possible anticancer properties. Compared with platinum complexes, those of ruthenium show greater resistance to hydrolysis and more selective action on tumors.
Many ruthenium-containing compounds exhibit useful catalytic properties. The catalysts are conveniently divided into those that are soluble in the reaction medium, homogeneous catalysts, and those that are not, which are called heterogeneous catalysts.
Ruthenium nanoparticles can be formed inside halloysite. This abundant mineral naturally has a structure of rolled nanosheets (nanotubes), which can support both the Ru nanocluster synthesis and its products for subsequent use in industrial catalysis.
Solutions containing ruthenium trichloride are highly active for olefin metathesis. Such catalysts are used commercially for the production of polynorbornene for example. Well defined ruthenium carbene and alkylidene complexes show comparable reactivity and provide mechanistic insights into the industrial processes. The Grubbs' catalysts for example have been employed in the preparation of drugs and advanced materials.
Ruthenium complexes are highly active catalysts for transfer hydrogenations (sometimes referred to as "borrowing hydrogen" reactions). This process is employed for the enantioselective hydrogenation of ketones, aldehydes, and imines. This reaction exploits using chiral ruthenium complexes introduced by Ryoji Noyori. For example, (cymene)Ru(S,S-TsDPEN) catalyzes the hydrogenation of benzil into (R,R)-hydrobenzoin. In this reaction, formate and water/alcohol serve as the source of H2:
In 2012, Masaaki Kitano and associates, working with an organic ruthenium catalyst, demonstrated ammonia synthesis using a stable electride as an electron donor and reversible hydrogen store. Small-scale, intermittent production of ammonia, for local agricultural use, may be a viable substitute for electrical grid attachment as a sink for power generated by wind turbines in isolated rural installations.
Some ruthenium complexes absorb light throughout the visible spectrum and are being actively researched for solar energy technologies. For example, ruthenium-based compounds have been used for light absorption in dye-sensitized solar cells, a promising new low-cost solar cell system.
Many ruthenium-based oxides show very unusual properties, such as a quantum critical point behavior, exotic superconductivity (in its strontium ruthenate form), and high-temperature ferromagnetism.
Applications of ruthenium thin films in microelectronics
Relatively recently, ruthenium has been suggested as a material that could beneficially replace other metals and silicides in microelectronics components. Ruthenium tetroxide (RuO4) is highly volatile, as is ruthenium trioxide (RuO3). By oxidizing ruthenium (for example with an oxygen plasma) into the volatile oxides, ruthenium can be easily patterned. The properties of the common ruthenium oxides make ruthenium a metal compatible with the semiconductor processing techniques needed to manufacture microelectronics.
To continue miniaturization of microelectronics, new materials are needed as dimensions change. There are three main applications for thin ruthenium films in microelectronics. The first is using thin films of ruthenium as electrodes on both sides of tantalum pentoxide (Ta2O5) or barium strontium titanate ((Ba, Sr)TiO3, also known as BST) in the next generation of three-dimensional dynamic random access memories (DRAMs). Ruthenium thin-film electrodes could also be deposited on top of lead zirconate titanate (Pb(ZrxTi1−x)O3, also known as PZT) in another kind of RAM, ferroelectric random access memory (FRAM). Platinum has been used as the electrodes in RAMs in laboratory settings, but it is difficult to pattern. Ruthenium is chemically similar to platinum, preserving the function of the RAMs, but in contrast to Pt patterns easily. The second is using thin ruthenium films as metal gates in p-doped metal-oxide-semiconductor field effect transistors (p-MOSFETs). When replacing silicide gates with metal gates in MOSFETs, a key property of the metal is its work function. The work function needs to match the surrounding materials. For p-MOSFETs, the ruthenium work function is the best materials property match with surrounding materials such as HfO2, HfSiOx, HfNOx, and HfSiNOx, to achieve the desired electrical properties. The third large-scale application for ruthenium films is as a combination adhesion promoter and electroplating seed layer between TaN and Cu in the copper dual damascene process. Copper can be directly electroplated onto ruthenium, in contrast to tantalum nitride. Copper also adheres poorly to TaN, but well to Ru. By depositing a layer of ruthenium on the TaN barrier layer, copper adhesion would be improved and deposition of a copper seed layer would not be necessary.
There are also other suggested uses. In 1990, IBM scientists discovered that a thin layer of ruthenium atoms created a strong anti-parallel coupling between adjacent ferromagnetic layers, stronger than any other nonmagnetic spacer-layer element. Such a ruthenium layer was used in the first giant magnetoresistive read element for hard disk drives. In 2001, IBM announced a three-atom-thick layer of the element ruthenium, informally referred to as "pixie dust", which would allow a quadrupling of the data density of current hard disk drive media.
Little is known about the health effects of ruthenium and it is relatively rare for people to encounter ruthenium compounds. Metallic ruthenium is inert (is not chemically reactive). Some compounds such as ruthenium oxide (RuO4) are highly toxic and volatile.
- It was common to give newly discovered elements Latin names (for example, lutetium and hafnium, both discovered in early 20th century, are named after the Latin names for Paris and Copenhagen). Claus chose to name the element "in Honour of my Motherland", and Claus was a Russian subject; as such, he chose the Latin name for Russia used back in the day, Ruthenia, as the basis for his name.
In contemporary Latin (as well as in contemporary English), Russia is usually referred to as Russia, and the name Ruthenia stands for a region in and around Zakarpattia Oblast in western Ukraine.
- Meija, Juris; et al. (2016). "Atomic weights of the elements 2013 (IUPAC Technical Report)". Pure and Applied Chemistry. 88 (3): 265–91. doi:10.1515/pac-2015-0305.
- "Ruthenium: ruthenium(I) fluoride compound data". OpenMOPAC.net. Retrieved 10 December 2007.
- Haynes, p. 4.130
- Matthey, Johnson. "The Discovery of Ruthenium". Johnson Matthey Technology Review. Retrieved 25 August 2020.
- Pitchkov, V. N. (1996). "The Discovery of Ruthenium". Platinum Metals Review. 40 (4): 181–188.
- Summary. Ruthenium. platinum.matthey.com, p. 9 (2009)
- PGM Market Report. platinum.matthey.com, p. 30 (May 2018)
- Haynes, p. 4.31
- Greenwood and Earnshaw, p. 1076
- Greenwood and Earnshaw, p. 1078
- Greenwood and Earnshaw, p. 1075
- Greenwood and Earnshaw, p. 1074
- Greenwood and Earnshaw, p. 1077
- Lide, D. R., ed. (2005). CRC Handbook of Chemistry and Physics (86th ed.). Boca Raton (FL): CRC Press. ISBN 0-8493-0486-5. Section 11, Table of the Isotopes
- Audi, Georges; Bersillon, Olivier; Blachot, Jean; Wapstra, Aaldert Hendrik (2003), "The NUBASE evaluation of nuclear and decay properties", Nuclear Physics A, 729: 3–128, Bibcode:2003NuPhA.729....3A, doi:10.1016/j.nuclphysa.2003.11.001
- Masson, O.; Steinhauser, G.; Zok, D.; Saunier, O.; Angelov, H.; Babić, D.; Bečková, V.; Bieringer, J.; Bruggeman, M.; Burbidge, C. I.; Conil, S.; Dalheimer, A.; De Geer, L.-E.; De Vismes Ott, A.; Eleftheriadis, K.; Estier, S.; Fischer, H.; Garavaglia, M. G.; Gasco Leonarte, C.; Gorzkiewicz, K.; Hainz, D.; Hoffman, I.; Hýža, M.; Isajenko, K.; Karhunen, T.; Kastlander, J.; Katzlberger, C.; Kierepko, R.; Knetsch, G.-J.; et al. (2019). "Airborne concentrations and chemical considerations of radioactive ruthenium from an undeclared major nuclear release in 2017". PNAS. 116 (34): 16750–16759. Bibcode:2019PNAS..11616750M. doi:10.1073/pnas.1907571116. PMC 6708381. PMID 31350352.
- Emsley, J. (2003). "Ruthenium". Nature's Building Blocks: An A-Z Guide to the Elements. Oxford, England, UK: Oxford University Press. pp. 368–370. ISBN 978-0-19-850340-8.
- Greenwood and Earnshaw, p. 1071
- George, Micheal W. "2006 Minerals Yearbook: Platinum-Group Metals" (PDF). United States Geological Survey USGS. Retrieved 16 September 2008.
- "Commodity Report: Platinum-Group Metals" (PDF). United States Geological Survey USGS. Retrieved 16 September 2008.
- Loferski, Patricia J.; Ghalayini, Zachary T. and Singerling, Sheryl A. (2018) Platinum-group metals. 2016 Minerals Yearbook. USGS. p. 57.3.
- Hartman, H. L.; Britton, S. G., eds. (1992). SME mining engineering handbook. Littleton, Colo.: Society for Mining, Metallurgy, and Exploration. p. 69. ISBN 978-0-87335-100-3.
- Harris, Donald C.; Cabri, L. J. (1973). "The nomenclature of the natural alloys of osmium, iridium and ruthenium based on new compositional data of alloys from world-wide occurrences". The Canadian Mineralogist. 12 (2): 104–112.
- Renner, H.; Schlamp, G.; Kleinwächter, I.; Drost, E.; Lüschow, H. M.; Tews, P.; Panster, P.; Diehl, M.; Lang, J.; Kreuzer, T.; Knödler, A.; Starz, K. A.; Dermann, K.; Rothaut, J.; Drieselman, R. (2002). "Platinum group metals and compounds". Ullmann's Encyclopedia of Industrial Chemistry. Wiley. doi:10.1002/14356007.a21_075. ISBN 978-3527306732.
- Seymour, R. J.; O'Farrelly, J. I. (2001). "Platinum-group metals". Kirk Othmer Encyclopedia of Chemical Technology. Wiley. doi:10.1002/0471238961.1612012019052513.a01.pub2. ISBN 978-0471238966.
- Gilchrist, Raleigh (1943). "The Platinum Metals". Chemical Reviews. 32 (3): 277–372. doi:10.1021/cr60103a002.
- Cotton, Simon (1997). Chemistry of Precious Metals. Springer-Verlag New York, LLC. pp. 1–20. ISBN 978-0-7514-0413-5.
- Hunt, L. B.; Lever, F. M. (1969). "Platinum Metals: A Survey of Productive Resources to industrial Uses" (PDF). Platinum Metals Review. 13 (4): 126–138.
- Swain, P.; Mallika, C.; Srinivasan, R.; Mudali, U. K.; Natarajan, R. (2013). "Separation and recovery of ruthenium: a review". J. Radioanal. Nucl. Chem. 298 (2): 781–796. doi:10.1007/s10967-013-2536-5. S2CID 95804621.CS1 maint: uses authors parameter (link)
- Greenwood, N. N.; & Earnshaw, A. (1997). Chemistry of the Elements (2nd Edn.), Oxford:Butterworth-Heinemann. ISBN 0-7506-3365-4.
- Greenwood and Earnshaw, pp. 1080–1
- Greenwood and Earnshaw, p. 1082
- Greenwood and Earnshaw, p. 1083
- Greenwood and Earnshaw, p. 1084
- Hartwig, J. F. (2010) Organotransition Metal Chemistry, from Bonding to Catalysis, University Science Books: New York. ISBN 1-891389-53-X
- Weeks, Mary Elvira (1932). "The discovery of the elements. VIII. The platinum metals". Journal of Chemical Education. 9 (6): 1017. Bibcode:1932JChEd...9.1017W. doi:10.1021/ed009p1017.
- Raub, Christoph J. (2004). "The Minting of Platinum Roubles. Part I: History and Current Investigations". 48 (2): 66–69. Cite journal requires
- Jędrzej Śniadecki (1808). Rosprawa o nowym metallu w surowey platynie odkrytym (in Polish). Wilno: Nakł. i Drukiem J. Zawadzkiego. (Dissertation about the new metal discovered in raw platinum.)
- "New Metals in the Uralian Platina". The Philosophical Magazine. 2 (11): 391–392. 1827. doi:10.1080/14786442708674516.
- Osann, Gottfried (1829). "Berichtigung, meine Untersuchung des uralschen Platins betreffend". Poggendorffs Annalen der Physik und Chemie. 15: 158. doi:10.1002/andp.18290910119.
- Osann, Gottfried (1828). "Fortsetzung der Untersuchung des Platins vom Ural". Poggendorffs Annalen der Physik und Chemie. 14 (6): 283–297. Bibcode:1828AnP....89..283O. doi:10.1002/andp.18280890609. The original sentence on p. 339 reads: "Da dieses Metall, welches ich nach den so eben beschriebenen Eigenschaften als ein neues glaube annehmen zu müssen, sich in größerer Menge als das früher erwähnte in dem uralschen Platin befindet, und auch durch seinen schönen, dem Golde ähnlichen metallischen Glanz sich mehr empfiehlt, so glaube ich, daß der Vorschlag, das zuerst aufgefundene neue Metall Ruthenium zu nennen, besser auf dieses angewendet werden könne."
- Claus, Karl (1845). "О способе добывания чистой платины из руд". Горный журнал (Mining Journal) (in Russian). 7 (3): 157–163.
- Rao, C; Trivedi, D. (2005). "Chemical and electrochemical depositions of platinum group metals and their applications". Coordination Chemistry Reviews. 249 (5–6): 613. doi:10.1016/j.ccr.2004.08.015.
- Weisberg, A (1999). "Ruthenium plating". Metal Finishing. 97: 297. doi:10.1016/S0026-0576(00)83089-5.
- Prepared under the direction of the ASM International Handbook Committee; Merrill L. Minges, technical chairman (1989). Electronic materials handbook. Materials Park, OH: ASM International. p. 184. ISBN 978-0-87170-285-2.
- Busana, M. G.; Prudenziati, M.; Hormadaly, J. (2006). "Microstructure development and electrical properties of RuO2-based lead-free thick film resistors". Journal of Materials Science: Materials in Electronics. 17 (11): 951. doi:10.1007/s10854-006-0036-x. hdl:11380/303403. S2CID 135485712.
- Rane, Sunit; Prudenziati, Maria; Morten, Bruno (2007). "Environment friendly perovskite ruthenate based thick film resistors". Materials Letters. 61 (2): 595. doi:10.1016/j.matlet.2006.05.015. hdl:11380/307664.
- Slade, Paul G., ed. (1999). Electrical contacts : principles and applications. New York, NY: Dekker. pp. 184, 345. ISBN 978-0-8247-1934-0.
- Schutz, R. W. (1996). "Ruthenium Enhanced Titanium Alloys" (PDF). Platinum Metals Review. 40 (2): 54–61.
- "Fourth generation nickel base single crystal superalloy. TMS-138 / 138A" (PDF). High Temperature Materials Center, National Institute for Materials Science, Japan. July 2006. Archived from the original (PDF) on 18 April 2013.
- Koizumi, Yutaka; et al. "Development of a Next-Generation Ni-base Single Crystal Superalloy" (PDF). Proceedings of the International Gas Turbine Congress, Tokyo 2–7 November 2003. Archived from the original (PDF) on 10 January 2014.
- Walston, S.; Cetel, A.; MacKay, R.; O'Hara, K.; Duhl, D.; Dreshfield, R. (December 2004). "Joint Development of a Fourth Generation Single Crystal Superalloy" (PDF). NASA.
- Bondarenko, Yu. A.; Kablov, E. N.; Surova, V. A.; Echin, A. B. (2006). "Effect of high-gradient directed crystallization on the structure and properties of rhenium-bearing single-crystal alloy". Metal Science and Heat Treatment. 48 (7–8): 360. Bibcode:2006MSHT...48..360B. doi:10.1007/s11041-006-0099-6. S2CID 136907279.
- Mottishaw, J. (1999). "Notes from the Nib Works—Where's the Iridium?". The PENnant. XIII (2). Archived from the original on 4 June 2002.
- Cardarelli, François (2008). "Dimensionally Stable Anodes (DSA) for Chlorine Evolution". Materials Handbook: A Concise Desktop Reference. London: Springer. pp. 581–582. ISBN 978-1-84628-668-1.
- Varney, Mark S. (2000). "Oxygen Microoptode". Chemical sensors in oceanography. Amsterdam: Gordon & Breach. p. 150. ISBN 978-90-5699-255-2.
- Hayat, M. A. (1993). "Ruthenium red". Stains and cytochemical methods. New York, NY: Plenum Press. pp. 305–310. ISBN 978-0-306-44294-0.
- Wiegel, T. (1997). Radiotherapy of ocular disease, Ausgabe 13020. Basel, Freiburg: Karger. ISBN 978-3-8055-6392-5.
- Richards, A. D.; Rodger, A. (2007). "Synthetic metallomolecules as agents for the control of DNA structure" (PDF). Chem. Soc. Rev. 36 (3): 471–483. doi:10.1039/b609495c. PMID 17325786.
- NCJRS Abstract – National Criminal Justice Reference Service. Ncjrs.gov. Retrieved on 2017-02-28.
- Vinokurov, Vladimir A.; Stavitskaya, Anna V.; Chudakov, Yaroslav A.; Ivanov, Evgenii V.; Shrestha, Lok Kumar; Ariga, Katsuhiko; Darrat, Yusuf A.; Lvov, Yuri M. (2017). "Formation of metal clusters in halloysite clay nanotubes". Science and Technology of Advanced Materials. 18 (1): 147–151. Bibcode:2017STAdM..18..147V. doi:10.1080/14686996.2016.1278352. PMC 5402758. PMID 28458738.
- Delaude, Lionel and Noels, Alfred F. (2005). "Metathesis". Kirk-Othmer Encyclopedia of Chemical Technology. Weinheim: Wiley-VCH. doi:10.1002/0471238961.metanoel.a01. ISBN 978-0471238966.CS1 maint: uses authors parameter (link)
- Fürstner, Alois (2000). "Olefin Metathesis and Beyond". Angewandte Chemie International Edition. 39 (17): 3012–3043. doi:10.1002/1521-3773(20000901)39:17<3012::AID-ANIE3012>3.0.CO;2-G. PMID 11028025.
- Noyori, R.; Ohkuma, T.; Kitamura, M.; Takaya, H.; Sayo, N.; Kumobayashi, H.; Akutagawa, S. (1987), "Asymmetric hydrogenation of .beta.-keto carboxylic esters. A practical, purely chemical access to .beta.-hydroxy esters in high enantiomeric purity", Journal of the American Chemical Society, 109 (19): 5856, doi:10.1021/ja00253a051
- Ikariya, Takao; Hashiguchi, Shohei; Murata, Kunihiko and Noyori, Ryōji (2005). "Preparation of Optically Active (R,R)-Hydrobenzoin from Benzoin or Benzil". Organic Syntheses: 10.CS1 maint: multiple names: authors list (link)
- Chen, Fei (2015). "Synthesis of Optically Active 1,2,3,4-Tetrahydroquinolines via Asymmetric Hydrogenation Using Iridium-Diamine Catalyst". Org. Synth. 92: 213–226. doi:10.15227/orgsyn.092.0213.
- Kitano, Masaaki; Inoue, Yasunori; Yamazaki, Youhei; Hayashi, Fumitaka; Kanbara, Shinji; Matsuishi, Satoru; Yokoyama, Toshiharu; Kim, Sung-Wng; Hara, Michikazu; Hosono, Hideo (2012). "Ammonia synthesis using a stable electride as an electron donor and reversible hydrogen store". Nature Chemistry. 4 (11): 934–940. Bibcode:2012NatCh...4..934K. doi:10.1038/nchem.1476. PMID 23089869.
- Schulz, Hans (1999). "Short history and present trends of Fischer–Tropsch synthesis". Applied Catalysis A: General. 186 (1–2): 3–12. doi:10.1016/S0926-860X(99)00160-X.
- Kuang, Daibin; Ito, Seigo; Wenger, Bernard; Klein, Cedric; Moser, Jacques-E; Humphry-Baker, Robin; Zakeeruddin, Shaik M.; Grätzel, Michael (2006). "High Molar Extinction Coefficient Heteroleptic Ruthenium Complexes for Thin Film Dye-Sensitized Solar Cells". Journal of the American Chemical Society. 128 (12): 4146–54. doi:10.1021/ja058540p. PMID 16551124. S2CID 39111991.
- Perry, R.; Kitagawa, K.; Grigera, S.; Borzi, R.; MacKenzie, A.; Ishida, K.; Maeno, Y. (2004). "Multiple First-Order Metamagnetic Transitions and Quantum Oscillations in Ultrapure Sr.3Ru2O7". Physical Review Letters. 92 (16): 166602. arXiv:cond-mat/0401371. Bibcode:2004PhRvL..92p6602P. doi:10.1103/PhysRevLett.92.166602. PMID 15169251. S2CID 26241456.
- Maeno, Yoshiteru; Rice, T. Maurice; Sigrist, Manfred (2001). "The Intriguing Superconductivity of Strontium Ruthenate" (PDF). Physics Today. 54 (1): 42. Bibcode:2001PhT....54a..42M. doi:10.1063/1.1349611.
- Shlyk, Larysa; Kryukov, Sergiy; Schüpp-Niewa, Barbara; Niewa, Rainer; De Long, Lance E. (2008). "High-Temperature Ferromagnetism and Tunable Semiconductivity of (Ba, Sr)M2±xRu4∓xO11 (M = Fe, Co): A New Paradigm for Spintronics". Advanced Materials. 20 (7): 1315. doi:10.1002/adma.200701951.
- Wei, P.; Desu, S. B. (1997). "Reactive ion etching of RuO2 films: the role of additive gases in O2 discharge". Physica Status Solidi A. 161 (1): 201–215. Bibcode:1997PSSAR.161..201P. doi:10.1002/1521-396X(199705)161:1<201::AID-PSSA201>3.0.CO;2-U.
- Lesaicherre, P. Y.; Yamamichi, S.; Takemura, K.; Yamaguchi, H.; Tokashiki, K.; Miyasaka, Y.; Yoshida, M.; Ono, H. (1995). "A Gbit-scale DRAM stacked capacitor with ECR MOCVD SrTiO3 over RIE patterned RuO2/TiN storage nodes". Integrated Ferroelectrics. 11 (1–4): 81–100. doi:10.1109/IEDM.1994.383296. ISBN 0-7803-2111-1. S2CID 113907761.
- Pan, W.; Desu, S. B. (1994). "Reactive Ion Etching of RuO2, Thin-Films Using the Gas-Mixture O2 CF3CFH2". Journal of Vacuum Science and Technology B. 12 (6): 3208–3213. Bibcode:1994JVSTB..12.3208P. doi:10.1116/1.587501.
- Vijay, D. P.; Desu, S. B.; Pan, W. (1993). "Reactive Ion Etching of Lead-Zirconate-Titanate (PZT) Thin-Film Capacitors". Journal of the Electrochemical Society. 140 (9): 2635–2639. Bibcode:1993JElS..140.2635V. doi:10.1149/1.2220876.CS1 maint: multiple names: authors list (link)
- Saito, S.; Kuramasu, K. (1992). "Plasma etching of RuO2 thin films". Japanese Journal of Applied Physics. 31 (1): 135–138. Bibcode:1992JaJAP..31..135S. doi:10.1143/JJAP.31.135.
- Aoyama, T; Eguchi, K (1999). "Ruthenium films prepared by liquid source chemical vapor deposition using bis-(ethylcyclopentadienyl)ruthenium". Japanese Journal of Applied Physics. 38 (10A): 1134–6. Bibcode:1999JaJAP..38L1134A. doi:10.1143/JJAP.38.L1134.
- Iizuka, T; Arita, K; Yamamoto, I; Yamamichi, S (2001). "(Ba,Sr)TiO3 thin-film capacitors with Ru electrodes for application to ULSI processes". NEC Research and Development. 42: 64–9.
- Yamamichi, S.; Lesaicherre, P.; Yamaguchi, H.; Takemura, K.; Sone, S.; Yabuta, H.; Sato, K.; Tamura, T.; Nakajima, K. (1997). "A stacked capacitor technology with ECR plasma MOCVD (Ba,Sr)TiO3 and RuO2/Ru/TiN/TiSix storage nodes for Gb-scale DRAM's". IEEE Transactions on Electron Devices. 44 (7): 1076–1083. Bibcode:1997ITED...44.1076Y. doi:10.1109/16.595934.
- Bandaru, J; Sands, T; Tsakalakos, L (1998). "Simple Ru electrode scheme for ferroelectric (Pb,La)(Zr,Ti)O3 capacitors directly on silicon". Journal of Applied Physics. 84 (2): 1121–1125. Bibcode:1998JAP....84.1121B. doi:10.1063/1.368112.
- Maiwa, H; Ichinose, N; Okazaki, K (1994). "Preparation and properties of Ru and RuO2 thin-film electrodes for ferroelectric thin films". Jpn. J. Appl. Phys. 33 (9B): 5223–6. Bibcode:1994JaJAP..33.5223M. doi:10.1143/JJAP.33.5223.
- Misra, V; Lucovsky, G; Parsons, G (2002). "Issues in high-kappa gate stack interfaces". MRS Bulletin. 27 (3): 212–216. doi:10.1557/mrs2002.73.
- Chan, R; Arunagiri, T. N; Zhang, Y; Chyan, O; Wallace, R. M; Kim, M. J; Hurd, T. Q (2004). "Diffusion Studies of Copper on Ruthenium Thin Film". Electrochemical and Solid-State Letters. 7 (8): G154–G157. doi:10.1149/1.1757113.
- Cho, S. K; Kim, S.-K; Kim, J. J; Oh, S. M; Oh, Seung Mo (2004). "Damascene Cu electrodeposition on metal organic chemical vapor deposition-grown Ru thin film barrier". Journal of Vacuum Science and Technology B. 22 (6): 2649–2653. Bibcode:2004JVSTB..22.2649C. doi:10.1116/1.1819911.
- Chyan, O; Arunagiri, T. N; Ponnuswamy, T (2003). "Electrodeposition of Copper Thin Film on Ruthenium". Journal of the Electrochemical Society. 150 (5): C347–C350. doi:10.1149/1.1565138.
- Kwon, O.-K; Kwon, S.-H; Park, H.-S; Kang, S.-W (2004). "PEALD of a Ruthenium Adhesion Layer for Copper Interconnects". Journal of the Electrochemical Society. 151 (12): C753–C756. Bibcode:2004JElS..151C.753K. doi:10.1149/1.1809576.
- Kwon, O.-K; Kim, J.-H; Park, H.-S; Kang, S.-W (2004). "Atomic Layer Deposition of Ruthenium Thin Films for Copper Glue Layer". Journal of the Electrochemical Society. 151 (2): G109–G112. Bibcode:2004JElS..151G.109K. doi:10.1149/1.1640633.
- Moffat, T. P.; Walker, M.; Chen, P. J.; Bonevich, J. E.; Egelhoff, W. F.; Richter, L.; Witt, C.; Aaltonen, T.; Ritala, M. (2006). "Electrodeposition of Cu on Ru Barrier Layers for Damascene Processing". Journal of the Electrochemical Society. 153 (1): C37–C50. Bibcode:2006JElS..153C..37M. doi:10.1149/1.2131826.
- Hayes, Brian (2002). "Terabyte Territory". American Scientist. 90 (3): 212. doi:10.1511/2002.9.3287.
- "Ruthenium". espimetals.com. Retrieved 26 July 2020.
- "Ruthenium (Ru) - Chemical properties, Health and Environmental effects". lenntech.com. Retrieved 26 July 2020.
- Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 978-0-08-037941-8.
- Haynes, William M., ed. (2016). CRC Handbook of Chemistry and Physics (97th ed.). CRC Press. ISBN 9781498754293.
- Ruthenium at The Periodic Table of Videos (University of Nottingham)
- Nano-layer of ruthenium stabilizes magnetic sensors Archived 5 April 2016 at the Wayback Machine